cultivator manual

The cultivator driven by a Honda engine is an essential tool for working vegetable gardens or simply gardens. If you don’t know how to operate it, but would like to, here are our tips, based on the manufacturer’s instructions for use, for using an efficient and safe engine.

Plowing is an indispensable operation when you cultivate the land from which you harvested or when you want to change crops. The benefits of plowing are extremely numerous, as mankind has learned since prehistory. The use of the cultivator allows the decompaction of the soil, its oxygenation, the removal of vegetable residues, the limitation of weed regeneration and prepares the soil for sowing.

Wear protective equipment

As every time you operate a motorized machine, you must make sure that the risk of accidents to which you are exposed tends to 0. The cultivator carries with it the danger of the cutter and extremely sharp blades.

Imagine if he could drill the earth so efficiently, about what might happen if the creature fell prey to the structure of the car. And no matter how careful you are, there is still a very low probability of a disaster. Therefore, it is recommended to equip yourself properly, first of all with boots or safety boots and protective gloves (you can opt for anti-cutting items and, if possible, anti-vibration at the same time).

Don’t be afraid to wear goggles, to keep your eyes out of unwanted projectiles and, why not, special headphones to protect your hearing.

Prepare the land and the surroundings

Before starting the engine, you need to make sure of some important elements. First of all, if you have armed yourself with so many protection measures and it seems that they are still not enough, the only way you will be absolutely sure that your pets and children are safe is to keep them away from the place of operations. .

Make a reconnaissance of the land on which you will work. First of all, you must keep in mind that you are not allowed to use the cultivator over a network of utilities, such as electric cables, water or gas pipes. In vain the garden will show you exemplary, if your household and a few others will be deprived of the benefits of civilization.

If you want your efforts to be successful and your machine to remain in good working order, you must clean, as much as possible, everything that could prevent the blades from doing their job well: stones, wood, metal objects. which can be designed in the most unexpected and dangerous ways possible.

Respect the topography of the place and try to avoid being too close to the trees or fruit trees in the orchard. Passing the machine and, consequently, the blades can damage the roots of the trees, and can even condemn them to drying.

Read the user manual

Before putting the cultivator into operation, read carefully the instructions for use that came to you with the machine. Thus, you will be able to learn and better understand the component parts of the machine, how to handle it, and, last but not least, to receive answers to all your questions related to the maintenance and proper functioning of the machine.

Familiarize yourself, on this occasion, with the controls of the clutch and the gearbox, as well as with the safety devices of the car.

Check the integrity and proper operation of the cultivator

Important elements for your safety and for maintaining the technical integrity of the car must be reviewed. Take care of the oil level (engine, gearbox or axle), the air filter cleaning stage (it must be free of impurities or insects), the fuel level in the tank and the tire pressure. between 0.5 and 1 bar).

Also, take the time to see if all the components are assembled correctly and if all the cables are whole and in place.

Use

Adjust the working depth and the number of cutters depending on the hardness of the soil and the crop you are looking to sow. If the ground is too arid, try to water it as much as possible a few days before starting the operation. Remember that, for a cultivator, it is preferable for the land to be looser.

Make sure the car is disengaged and the gearbox is in the neutral position. Switch the safety to the “on” position and let the engine run for a few moments before using the appliance.

Once started, it adapts the forward speed to the type of soil. On loose and regularly worked land, you can walk faster than on hard, well-drained soil. If the car goes through the water, tilt the handlebars to one side or the other.

If the ground is hard, it is preferable to go over it several times, increasing the working depth with each new passage. In conditions of humidity and normal soil consistency, a single pass is sufficient. On the other hand, it is not advisable to work in soil dripping with water, because as it dries it cements.

Avoid too steep slopes, but if you must immediately work on such terrain, move transversely, never up or down. From the manufacturer’s warnings, we know that you may be in danger of overturning if you do not follow this precaution.

Properly maintain and store the machine

After each use, it is recommended to clean the cutter of earth debris with water, wearing protective gloves, and the engine is wiped of dust residue with a cloth (of course, after it has cooled before).

At intervals set by the manufacturer, the oil must be changed, the authorized inspection must be made and all the elements of the machine must be checked again. Current operations (checking cables, spark plugs, brake, etc.) are done before and after each use. The inspection by a Honda representative is done annually, and the oil is changed, as appropriate.

In case of defects or if you find that some parts are damaged, you must replace what is required, but only with other original Honda components or compatible, but in this case only on the recommendation of the company representative.

The warranty, generous in time and service for the best Honda cultivators , will cover any service required to remedy defects caused by certain materials or manufacturing errors.

Shorty fell in love, yeah she always call me handsome